MECHANICAL DATA
Key	86 keys
Key technology	Carbon contact + FPC carbon-on-gold key switch technology
Key travel	1.50mm±0.10mm
Switch life	more than 5 million of operations
Actuation Force	1.2N±0.2N
N.W.	175g
ELECTRICAL DATA
Supply Voltage	DC +5V±5%
Current Rating	≤30mA when backlight is off, ≤300mA with backlight on
EMC Standard	EN 55032:2015 EN 55035:2017
Lifespan	> 5 years
Interface	Dot matrix (USB/PS2 optional)
OS	All Windows, Linux, Unix, Mac OSX, Vxworks, Android, (U-cos--To be confirmed).
ENVIRONMENTAL ADAPTABILITY
Operating temperature	-40℃ to + 75℃
Storage temperature	-50℃ to + 85℃
Humidity test	1. Test temperature: 30℃~60℃,
	2. Test humidity: 95%RH,
	3. Test period: 24h as a cycle, 10 cycles, total 240h
Atmospheric pressure	57kPa~106kPa
Vibration test	0~2000Hz, displacement 1mm, acceleration 70m/s²
Shock test	1. Pulse waveform: post-peak sawtooth wave
	2. Peak acceleration: 40g
	3. Pulse duration: 11ms
	4. Test period: X,Y, Z triaxial, 3 times impact to each axial front and back, a total of 18 times
Temperature shock test	1. Test temperature: -55℃~75℃
Temperature shock test	2. Test period: -55℃ for 2h, 75℃ for 2h, 3 cycles, a total of 12h
Fungus test	1. Test temperature: (30±1) ℃
	2. Relative humidity: (95±5) %RH
	3. Test strains: Aspergillus flavus, Aspergillus variegatus, Penicillium cordylus, mucocellus globularis, Aspergillus Niger
	4. Test period: 28 days (672 hours)
Salt spray test	1. Place the sample into the Salt Spray Corrosion Test Chamber, temperature inside the chamber is 35 ℃; Spray the sample with a NaCl test solution with a concentration of 5 ± 1% and a PH value of 6.6 for 24h at a pressure of 96ka; Test duration is 24 h.
	2. After 24h of spray, dry and store the sample for 24h in an environment with temperature of 23 ℃ and humidity of 50%;
	3. Steps 1-2 as one cycle, test for 2 cycles, total 96 h.
	4. After the test, exhaust the fog for 10 min, check the sample after cleaning it with flowing water under standard atmospheric conditions.
Rain test	1. Test procedure: Procedure - rainfall and blowing rain
	2. Test direction: keyboard surface
	3. Wind velocity: no less than 18 m/s
	4. Test duration: 3h
Dust test	1. Test procedure: Procedure - Dust Blowing
	2. Dust content: 10.6g/m³±7g/m³
	3. Firstly conduct dust blowing for 6h under 23°C, then adjust the temperature to 60°C and stabilize for 1h, and then re-conduct dust blowing for 6h.
Transport package drop test	1. Test procedure: Transport Drop Test
	2. Sample state: Weight≤45.4kg, Maximum Size<91.0cm;
	3. Drop height: 122cm
	4. Drop count: drop to each surface, edge and corner, 26 times of drop totally.
RELIABILITY
RoHS compliant, CE and FCC certified, meet MIL-STD-810H (high and low wide temperature, low pressure, humidity, vibration, shock, temperature shock, rain, salt mist, sand and dust, fungus, solar radiation etc.).
Protection Level	IP67 (front panel)
Key Lifespan	>5 million actuations
MTBF	>20000H
MTTR	<30min
APPLICATION	Vehicle, aerospace, naval, defense, maritime, Radar, console, portable rugged laptop, UAV ground station etc.

Key Technology Rugged System Ltd

K-TEK-M280-FN-BL-FC-KC-DM