MECHANICAL DATA
Key	103 keys
Key switch	Rugged scissor switch technology
Key travel	1.20mm±0.10mm
Key life span	more than 5 million of operations
Actuation Force	0.8N±0.2N
ELECTRICAL DATA
Supply Voltage	DC +5V±5%
Current Rating	≤30mA when backlight is off, ≤300mA with backlight on
Lifespan	> 5 years
Interface	USB
OS	All Windows, Linux, Unix, Mac OSX, Vxworks, Android
MIL-STD-461G (EMC, EMI, EMS, ESD).:
1	CE101 25Hz - 10kHz Conducted Emissions, Audio Frequency Currents, Power leads
2	CE102 10kHz -10MHz Conducted Emissions, Radio Frequency Potentials, Power leads
3	CS101 25Hz - 150kHz Conducted Susceptibility, Power Leads
4	CS106 Conducted Susceptibility, Transients, Power Leads
5	CS112 Electrostatic Discharge Susceptibility
6	CS114 4kHz -400MHz Conducted Susceptibility, Bulk Cable injection
7	CS115 Conducted Susceptibility, Bulk Cable injection, Impulse Excitation
8	CS116 10kHz - 100MHz Conducted Susceptibility, Damped Sinusoidal Transients, Cables and Power Leads
9	RE101 25Hz -100kHz Radiated Emissions, Magnetic Field
10	RE102 10kHz - 18GHz Radiated Emissions, Electric Field
11	RS101 25HZ - 100kHz Radiated Susceptibility, Magnetic Field
12	RS103 10kHz - 40GHz Radiated Susceptibility, Electric Field
MIL-STD-810H (high and low wide temperature, low pressure, humidity, vibration, shock, temperature shock, drop rain, dust, salt mist, fungus, solar radiation etc.)
ENVIRONMENTAL ADAPTABILITY
Operating temperature	-40℃ to + 60℃
Storage temperature	-50℃ to + 70℃
Humidity test	1. Test temperature: 30℃~60℃,
	2. Test humidity: 95%RH,
	3. Test period: 24h as a cycle, 10 cycles, total 240h
Atmospheric pressure	57kPa~106kPa
Vibration test	0~5.1Hz, displacement 1mm
Shock test	1. Pulse waveform: post-peak sawtooth wave
	2. Peak acceleration: 40g
	3. Pulse duration: 11ms
	4. Test period: X,Y, Z triaxial, 3 times impact to each axial front and back, a total of 18 times
Temperature shock test	1. Test temperature: -50℃~70℃
Temperature shock test	2. Test period: -50℃ for 2h, 70℃ for 2h, 3 cycles, a total of 12h
Fungus test	1. Test temperature: (30±1) ℃
	2. Relative humidity: (95±5) %RH
	3. Test strains: Aspergillus flavus, Aspergillus variegatus, Penicillium cordylus, mucocellus globularis, Aspergillus Niger
	4. Test period: 28 days (672 hours)
Salt spray test	1. Place the sample into the Salt Spray Corrosion Test Chamber, temperature inside the chamber is 35 ℃; Spray the sample with a NaCl test solution with a concentration of 5 ± 1% and a PH value of 6.6 for 24h at a pressure of 96kPa; Test duration is 24 h.
	2. After 24h of spray, dry and store the sample for 24h in an environment with temperature of 23 ℃ and humidity of 50%;
	3. Steps 1-2 as one cycle, test for 2 cycles, total 96 h.
	4. After the test, exhaust the fog for 10 min, check the sample after cleaning it with flowing water under standard atmospheric conditions.
Rain test	1. Test procedure: Procedure - rainfall and blowing rain
	2. Test direction: keyboard surface
	3. Wind velocity: no less than 18 m/s
	4. Test duration: 3h
Dust test	1. Test procedure: Procedure - Dust Blowing
	2. Dust content: 10.6g/m³±7g/m³
	3. Firstly conduct dust blowing for 6h under 23°C, then adjust the temperature to 60°C and stabilize for 1h, and then re-conduct dust blowing for 6h.
Transport package drop test	1. Test procedure: Transport Drop Test
	2. Sample state: Weight≤45.4kg, Maximum Size<91.0cm;
	3. Drop height: 122cm;
	4. Drop count: drop to each surface, edge and corner, 26 times of drop totally.
RELIABILITY
RoHS compliant, CE and FCC certified
MIL-STD-461G (EMC, EMI, EMS, ESD) and MIL-STD-810H (high and low wide temperature, low pressure, humidity, vibration,
shock, temperature shock, drop, rain, dust and sandstorm, salt mist, fungus, solar radiation etc.)
Protection Level	IP67 (front panel)
Lifespan	> 5 years
MTBF	>20000H
MTTR	<30min
APPLICATION	Vehicle, aerospace, naval, maritime, Radar, display console, portable rugged laptop, UAV ground station etc.

Key Technology Rugged System Ltd

K-TEK-V405KP-FN-BL-FC-SC-ANA-151B-DWP